TERA 60V
/ 50
VERTICAL MACHINING
3 AXIS
32T
50 TAPER
BUILT-IN
SPINDLE
420 ft-lb
MAX. TORQUE
45 hp
MAX. POWER
12,000 rpm
MAX. SPEED
The TERA 60V/50 offers a larger spindle taper and more torque than the TERA 60V.
Whether you're machining hard materials or large components, the TERA 60V/50 ensures maximum metal removal with uncompromising accuracy and reliability.
– Higher Torque Output
The MICRO DYNAMICS 50 taper built-in spindle supports larger motors and more robust drive systems, delivering significantly higher torque—ideal for deep drilling, heavy-duty milling, and demanding cutting conditions.
– Exceptional Rigidity and Stability
The increased taper size and greater contact surface area enhance rigidity, reducing vibration and improving surface finish during heavy cutting operations.
– Supports Larger, Heavier Tooling
Capable of handling larger toolholders and cutters (e.g., face mills Ø6"–Ø8"), the 50 taper system increases material removal rates and overall productivity.
– Rapid Feedrate
Up to 2,047 ipm on X/Y-axis and 1,260 ipm on Z-axis, reducing non-cutting time significantly.
– High Speed Automatic Tool Changer
The multi-speed double arm allows the operator to adjust the speed of the tool changes for oversized, heavy tools and probes, to ensure accuracy and reliability.
Tool magazine capacity: 32 tools
Maximum Tool Diameter × Length: Ø5" × 13.8"
Without adjacent tools: Ø9"
– Thermal Compensation
DYPEC® Dynamic Predictive Error Compensation corrects position error caused by thermal changes.
(Resolution 0.1 μm)
– Advanced CNC Controller
Equipped with a MITSUBISHI M830VW controller and a MICRO DYNAMICS HMI for intuitive operation.
MACHINING CAPACITY
MACHINING DATA
6.3″ Face Mill
Cut (Width × Depth): 3.9" × 0.2"
Feedrate: 59 ipm
Spindle Speed: 450 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
45.8 cu in/min
97 %
MACHINING DATA
1.3" End Mill
Cut (Width × Depth): 1.3" × 0.2"
Feedrate: 91 ipm
Spindle Speed: 3,800 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
22.5 cu in/min
20 %
MACHINING DATA
3.1" Drill
Cut (Depth): 2"
Feedrate: 6 ipm
Spindle Speed: 800 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
49.1 cu in/min
94 %
MACHINING DATA
1.9" × 0.2" TAP
Feedrate: 17 ipm
Spindle Speed: 86 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
-
63 %
TRAVEL
■ X Axis
■ Y Axis
■ Z Axis
■ Spindle Nose to Table Surface
■ Spindle Center to Column Front
60"
28"
25"
3.9" – 31"
28.9"
TABLE
■ Table Size
■ Max. Table Load
■ Table Height (from the Ground)
67.9" × 27.6"
4,409 lb
35.4"
SPINDLE
■ Spindle Taper
■ I.D. of Spindle Bearing
■ Spindle Speed
■ Max. Power
■ Max. Cutting Torque
■ Clamping Force
■ Max. Speed for Rigid Tapping
50 Taper Dual Contact
ø3.93" / ø3.14”
50 – 12,000 rpm
45 hp
420 ft-lbf
4,629 lbf
3,000 rpm
FEEDRATE
■ Rapid Feedrate - X Axis
■ Rapid Feedrate - Y Axis
■ Rapid Feedrate - Z Axis
■ Cutting Feedrate
2,047 ipm
2,047 ipm
1,259 ipm
0 – 787 ipm
ATC
■ Magazine Capacity
■ Tool Selection
■ Tool Shank Type
■ Pull Stud Type
■ Max. Tool (Dia. x L)
■ Without Adjacent Tool
■ Max. Tool Weight
32
Bi-Direction / Random
BT50 / CAT50 / DIN 50
JISB6339 / DIN 15˚
ø5" × 13.8"
ø9"
33.1 lb
PERIPHERAL
■ Power Consumption (220V/3PH)
■ Pneumatic Supply
■ Cutting Coolant Pump Motor
■ Base Wash Pump Motor
■ CTS Pump Motor (Opt.)
■ Coolant Tank Capacity
■ Foot Print Size (W × D)
■ Machine Height (H)
■ Packing Size (W × D × H)
■ Machine Net Weight
■ Machine Gross Weight
■ Positioning Accuracy/Full Stroke
■ Repeatability Accuracy
55 kVA
0.6 MPa (ANR)
1.5 HP
1.5 HP
4 HP
106 gal
170.2" × 115.6"
129.6"
161.4" × 90.9" × 100.4"
22,421 lb
23,281 lb
0.0002" (VDI 3441)
±0.0001"
■ Standard □ Optional
BUILT-IN SPINDLE
■ 12,000 rpm
ACCURACY
■ DYPEC® - Thermal Compensation
□ X / Y / Z Axis Linear Scale (Fagor)
□ X / Y / Z Axis Linear Scale (Heidenhain)
CONTROL
■ Micro Dynamics HMI
■ 15" Touchscreen Display
■ Mitsubishi M830VW CNC Control
■ EtherNet I/P Networked I/O
■ M30 Automatic Power Off
■ 8 M-Codes (M20 ~ M27)
□ Additional 8 M-Codes (M130 ~ M137)
PROBING
□ Renishaw Precision Measurement
TOOLS (Factory Order)
■ 32 Tools Magazine
□ Tool Magazine Auto Door
□ Servo Tool Magazine
■ Tool Magazine LED
■ ATC Mazagine Panel
4th / 5th AXIS PREPARATION
□ 4th Axis Pre-Wiring (Chip Enclosure - Cabinet)
COOLANT & CHIP MANAGEMENT
■ CTS Preparation (without Rotary Union)
□ 20-Bar (290 psi) CTS + ATS (Deublin Pop-Off Type)
□ 40-Bar (580 psi) CTS (Deublin Pop-Off Type)
□ 70-Bar (1,000 psi) CTS (Deublin Pop-Off Type)
■ Coolant System with Base Wash
□ Metal Coolant Ring
□ MQL - Minimum Quantity Lubrication (3 Valves)
■ Coolant Gun
□ CooIant Gun (High Pressure)
■ Air Gun
■ Twin Chip Augers
■ Scraper Type Chip Conveyor
□ Chain Type Chip Conveyor (Upgrade)
□ Drum Type Chip Conveyor (Upgrade)
□ Rear Type Chip Conveyor (Upgrade)
□ Chip Cart (110 L.)
□ Disc Type Oil Skimmer
□ Spinning Window
□ Oil Mist Collector Pre-Wiring
□ Oil Mist Collector OT-200
COLUMN RISER (Upgrade)
■ 150 mm (5.9") - Column Riser
SAFETY & POWER
□ CE Conformity Package
□ Transfomer for 380V / 415V / 440V Power Source
AUTOMATION
□ Automatic Servo Door / Side Window
□ Automatic Pneumatic Door / Side Window
OTHERS
■ FC300 Meehanite® Casting
■ Full Chip Enclosure
■ Safety Door
■ Manuals / Tool Kit / Foundation Kit
Machine Dimensions
_E.jpg)
Working Range
_E.jpg)
Tool System
