VERTICAL MACHINING
3 AXIS
40T
40 TAPER
TERA 60V
TERA series is the strongest Vertical Machining Center, providing powerful and precise results for manufacturers of dies and molds, aerospace, automotive, semiconductor, job shops and general machine sectors.
60" / 28" / 25"
X / Y / Z Travel
MICRO DYNAMICS HMI
Auto Part / Tool Setup
67.9" × 27.6"
Table Size
MITSUBISHI M830VW
High Speed CNC Control
BUILT-IN SPINDLE
15K rpm / 41 hp / 104 ft-lb
Tool to Tool 1.2 Sec.
High Speed ATC
DYPEC®
Thermal Compensation
MINIMAL FOOTPRINT
170.2" × 97.6"
KEY FEATURES
– Minimal Footprint
Machine dimensions of only 170.2" × 97.6", optimize efficiency, cut costs, and boost flexibility with a reduced footprint compared to other vertical machining centers with the same travel.
– Built-in Spindle
The standard 15,000 rpm spindle (optional 18,000 or 20,000 rpm) offers excellent cutting performance.
– Rapid Feedrate
Up to 2,047 ipm on X/Y-axis and 1,889 ipm on Z-axis, reducing non-cutting time significantly.
– Ribbed Structure
FC300 Meehanite® casting and optimized rib design using FEA analysis to ensure machining stability.
– High Speed Automatic Tool Changer
Tool to tool change time 1.2 seconds.
Standard 40-tool capacity, expandable to 60, 90, 120 tools.
– Thermal Compensation
DYPEC® Dynamic Predictive Error Compensation corrects position error caused by thermal changes.
(Resolution 0.1 μm)
– Advanced CNC Controller
Equipped with a MITSUBISHI M830VW controller and a MICRO DYNAMICS HMI for intuitive operation.
MACHINING CAPACITY
MACHINING DATA
2.5″ Face Mill
Cut (Width × Depth): 2" × 0.2"
Feedrate: 100 ipm
Spindle Speed: 2,173 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
46.7 cu in/min
87 %
MACHINING DATA
1.3" End Mill
Cut (Width × Depth): 1.3" × 0.2"
Feedrate: 91 ipm
Spindle Speed: 3,800 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
22.5 cu in/min
47 %
MACHINING DATA
1.8" Drill
Cut (Depth): 1.4"
Feedrate: 21 ipm
Spindle Speed: 2,100 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
50.9 cu in/min
90 %
MACHINING DATA
1.3" × 0.1" TAP
Feedrate: 15 ipm
Spindle Speed: 128 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
-
46 %
TRAVEL
■ X Axis
■ Y Axis
■ Z Axis
■ Spindle Nose to Table Surface
■ Spindle Center to Column Front
60"
28"
25"
3.9" – 29"
28.9"
TABLE
■ Table Size
■ Max. Table Load
■ Table Height (from the Ground)
67.9" × 27.6"
4,409 lb
35.4"
SPINDLE
■ Spindle Taper
■ I.D. of Spindle Bearing
■ Spindle Speed
■ Max. Power
■ Max. Cutting Torque
■ Clamping Force
■ Max. Speed for Rigid Tapping
40 Taper Dual Contact
ø2.75"
50 – 15,000 rpm
41 hp
104 ft-lbf
2,645 lbf
6,000 rpm
FEEDRATE
■ Rapid Feedrate - X Axis
■ Rapid Feedrate - Y Axis
■ Rapid Feedrate - Z Axis
■ Cutting Feedrate
2,047 ipm
2,047 ipm
1,889 ipm
0 – 787 ipm
ATC
■ Magazine Capacity
■ Tool Selection
■ Tool Shank Type
■ Pull Stud Type
■ Max. Tool (Dia. x L)
■ Without Adjacent Tool
■ Max. Tool Weight
40
Bi-Direction / Random
BT40 / CAT40
JIS6339 / CAT DIN 40
ø3" × 11.8"
ø6"
16 lb
PERIPHERAL
■ Power Consumption (220V/3PH)
■ Pneumatic Supply
■ Cutting Coolant Pump Motor
■ Base Wash Pump Motor
■ CTS Pump Motor (Opt.)
■ Coolant Tank Capacity
■ Foot Print Size (W × D)
■ Machine Height (H)
■ Packing Size (W × D × H)
■ Machine Net Weight
■ Machine Gross Weight
■ Positioning Accuracy/Full Stroke
■ Repeatability Accuracy
40 kVA
0.6 MPa (ANR)
1.5 HP
1.5 HP
4 HP
106 gal
170.2" × 97.6"
2,116.3"
167.3" × 91" × 100.4"
20,216 lb
21,076 lb
0.0002" (VDI 3441)
±0.0001"
■ Standard □ Optional
BUILT-IN SPINDLE
■ 15,000 rpm
□ 18,000 rpm
□ 20,000 rpm (Includes CTS Rotary Union)
ACCURACY
■ DYPEC® - Thermal Compensation
□ X / Y / Z Axis Linear Scale (Fagor)
□ X / Y / Z Axis Linear Scale (Heidenhain)
CONTROL
■ Micro Dynamics HMI
■ 15" Touchscreen Display
■ Mitsubishi M830VW CNC Control
■ EtherNet I/P Networked I/O
■ M30 Automatic Power Off
■ 8 M-Codes (M20 ~ M27)
□ Additional 8 M-Codes (M130 ~ M137)
PROBING
□ Renishaw Precision Measurement
TOOLS (Factory Order)
■ 40 Tools Magazine
□ 60 Tools Magazine
□ 90 Tools Magazine
□ Tool Magazine Auto Door
□ Servo Tool Magazine
■ Tool Magazine LED
■ ATC Mazagine Panel
4th / 5th AXIS PREPARATION
□ 4th Axis Pre-Wiring (Chip Enclosure - Cabinet)
COOLANT & CHIP MANAGEMENT
■ CTS Preparation (without Rotary Union)
□ 20-Bar (290 psi) CTS + ATS (Deublin Pop-Off Type)
□ 40-Bar (580 psi) CTS (Deublin Pop-Off Type)
□ 70-Bar (1,000 psi) CTS (Deublin Pop-Off Type)
■ Coolant System with Base Wash
□ Metal Coolant Ring
□ MQL - Minimum Quantity Lubrication (3 Valves)
■ Coolant Gun
□ CooIant Gun (High Pressure)
■ Air Gun
■ Twin Chip Augers
■ Scraper Type Chip Conveyor
□ Chain Type Chip Conveyor (Upgrade)
□ Drum Type Chip Conveyor (Upgrade)
□ Rear Type Chip Conveyor (Upgrade)
□ Chip Cart (110 L.)
□ Disc Type Oil Skimmer
□ Spinning Window
□ Oil Mist Collector Pre-Wiring
□ Oil Mist Collector OT-200
COLUMN RISER (Upgrade)
□ 100 mm (3.9") - Column Riser
□ 150 mm (5.9") - Column Riser
SAFETY & POWER
□ CE Conformity Package
□ Transfomer for 380V / 415V / 440V Power Source
AUTOMATION
□ Automatic Servo Door / Side Window
□ Automatic Pneumatic Door / Side Window
OTHERS
■ FC300 Meehanite® Casting
■ Full Chip Enclosure
■ Safety Door
■ Manuals / Tool Kit / Foundation Kit
Machine Dimensions
Working Range
Tool System
