TERA 50VT
/50
VERTICAL TRUNNION
4+1 AXIS
32T
50 TAPER
The TERA 50VT/50 is Micro Dynamics’s five-axis(*) trunnion table machine equipped with hydraulic brakes. The design allows the user to load three vises or use it as a 720 x 400 mm (28.3” x 15.8”) work table with a 320 mm (12.6”) diameter face plate.
For automation, the through hole of the rotary table allows for the plumbing of hydraulics, pneumatics, or other devices.
(*) 5-Axis simultaneous version is an optional upgrade.
FULL STROKE SUPPORT
ROTARY AXIS MOTION RANGES
TILTING AXIS MOTION RANGES
COMPLETE PROCESS IN 1 CYCLE
6 face job can be machined in one time.
- Left vise: cut dove tail.
- Central vise: 5-side machining.
- Right vise: finish dove tail.
FACE PLATE (OPT)
- 500 mm (20") and 630 mm
(24") diameter face plate
available for TERA 50VT/50.
MACHINING CAPACITY
MACHINING DATA
6.3″ Face Mill
Cut (Width × Deep): 3.9" × 0.2"
Feedrate: 59 ipm
Spindle Speed: 450 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
45.8 cu in/min
97 %
MACHINING DATA
1.3" End Mill
Cut (Width × Deep): 1.3" × 0.2"
Feedrate: 91 ipm
Spindle Speed: 3,800 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
22.5 cu in/min
20 %
MACHINING DATA
3.1" Drill
Cut (Deep): 2"
Feedrate: 6 ipm
Spindle Speed: 800 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
49.1 cu in/min
94 %
MACHINING DATA
1.9" × 0.2" TAP
Feedrate: 17 ipm
Spindle Speed: 86 rpm
Material: 1050 Steel
MATERIAL REMOVAL
SPINDLE LOAD
-
63 %
TRAVEL
■ X Axis
■ Y Axis
■ Z Axis
■ A Axis (Tilting Axis)
■ C Axis (Rotary Axis)
■ Spindle Nose to Table Surface
■ Spindle Center to Column Front
38"
28" (90º: 25.4”)
19.7"
40º – -120º
360º
3.9" – 23.6"
28.9"
TABLE
■ Table Size
■ Min. Table Index Unit
■ Max. Table Load
■ Table Height (from the Ground)
ø12.6": 28.3" × 15.7"
0.001º
551 lb: 0 º – 45º
331 lb: 45 º – 90º
47.4"
SPINDLE
■ Spindle Taper
■ I.D. of Spindle Bearing
■ Spindle Speed
■ Max. Power
■ Max. Cutting Torque
■ Clamping Force
■ Max. Speed for Rigid Tapping
50 Taper Dual Contact
ø3.93" / ø3.14”
50 – 12,000 rpm
45 hp
420 ft-lbf
4,629 lbf
3,000 rpm
FEEDRATE
■ Rapid Feedrate - X Axis
■ Rapid Feedrate - Y Axis
■ Rapid Feedrate - Z Axis
■ Rapid Feedrate - A (Tilting) Axis
■ Rapid Feedrate - C (Rotary) Axis
■ Cutting Feedrate
1,889 ipm
1,889 ipm
1,259 ipm
33 rpm
66 rpm
0 – 787 ipm
ATC
■ Magazine Capacity
■ Tool Selection
■ Tool Shank Type
■ Pull Stud Type
■ Max. Tool (Dia. × L)
■ Without Adjacent Tool
■ Max. Tool Weight
32
Bi-Direction / Random
BT50 / CAT50 / DIN 50
JISB6339 / DIN 15˚
ø5" × 13.8"
ø9"
33.1 lb
PERIPHERAL
■ Power Consumption (220V/3PH)
■ Pneumatic Supply
■ Cutting Coolant Pump Motor
■ Base Wash Pump Motor
■ CTS Pump Motor (Opt.)
■ Coolant Tank Capacity
■ Foot Print Size (W × D)
■ Machine Height (H)
■ Packing Size (W × D × H)
■ Machine Net Weight
■ Machine Gross Weight
■ Positioning Accuracy/Full Stroke
■ Repeatability Accuracy
55 kVA
0.6 MPa (ANR)
1.5 HP
1.5 HP
4 HP
92 gal
153.7” × 115.6”
133.9”
161.4" × 90.9" × 106.2"
23,369 lb
24,075 lb
0.0002" (VDI 3441)
±0.0001"
■ Standard □ Optional
BUILT-IN SPINDLE
■ 12,000 rpm
ACCURACY
■ DYPEC® - Thermal Compensation
□ X / Y / Z Axis Linear Scale (Fagor)
□ A / C Axis Rotary Encoder (Fagor)
□ X / Y / Z Axis Linear Scale (Heidenhain)
□ A / C Axis Rotary Encoder (Heidenhain)
CONTROL
■ Micro Dynamics HMI
■ 15" Touchscreen Display
■ Mitsubishi M830VW CNC Control
□ Mitsubishi M850VW CNC Control
■ EtherNet I/P Networked I/O
■ M30 Automatic Power Off
■ 8 M-Codes (M20 ~ M27)
□ Additional 8 M-Codes (M130 ~ M137)
PROBING
□ Renishaw Precision Measurement
TOOLS (Factory Order)
■ 32 Tools Magazine
□ Tool Magazine Auto Door
□ Servo Tool Magazine
■ Tool Magazine LED
■ ATC Mazagine Panel
FACE PLATE (Factory Order)
□ ø450 mm (18”) Trunnion Face Plate
□ ø500 mm (120”) Trunnion Face Plate
FIXTURING
□ 4-Port Pneumatic Piping for Fixture
□ 4-Port Hydraulic Piping for Fixture
COOLANT & CHIP MANAGEMENT
■ CTS Preparation (without Rotary Union)
□ 20-Bar (290 psi) CTS + ATS (Deublin Pop-Off Type)
□ 40-Bar (580 psi) CTS (Deublin Pop-Off Type)
□ 70-Bar (1,000 psi) CTS (Deublin Pop-Off Type)
■ Coolant System with Base Wash
□ Metal Coolant Ring
□ MQL - Minimum Quantity Lubrication (3 Valves)
■ Coolant Gun
□ CooIant Gun (High Pressure)
■ Air Gun
■ Twin Chip Augers
■ Scraper Type Chip Conveyor
□ Chain Type Chip Conveyor (Upgrade)
□ Drum Type Chip Conveyor (Upgrade)
□ Rear Type Chip Conveyor (Upgrade)
□ Chip Cart (110 L.)
□ Disc Type Oil Skimmer
□ Spinning Window
□ Oil Mist Collector Pre-Wiring
□ Oil Mist Collector OT-200
COLUMN RISER (Upgrade)
■ 357 mm (14.05") - Column Riser
SAFETY & POWER
□ CE Conformity Package
□ Transfomer for 380V / 415V / 440V Power Source
AUTOMATION
□ Automatic Servo Door / Side Window
□ Automatic Pneumatic Door / Side Window
OTHERS
■ FC300 Meehanite® Casting
■ Full Chip Enclosure
■ Safety Door
■ Manuals / Tool Kit / Foundation Kit
Machine Dimensions
_E.jpg)
Working Range
_E.jpg)
Tool System
