HMI_banner.jpg

MICRO DYNAMICS HMI

The Windows embedded HMI CNC gives the user the ability to create or add apps to make it flexible to operate and automate the machine. Operator can load, run or edit any program from any device: internal HMI memory, PC hard drive or external USB device.

The MEGA/TERA Series features Mitsubishi CNC M800 Control which is well suited to high-speed, high-accuracy machining and multi-axis, multi-part system control. Mitsubishi’s tool path graphics verification makes it easier for end users to check G-Code program before machining.

MICRO DYNAMICS CONTROLLER FEATURES

- Mitsubishi CNC M800 series.
- 15” Touchscreen display.
- 2,700 Block Look Ahead.
- 20 GB Data Server.
- 1,000 Programs in editing memory.
- 999 Sets in tool compensation.
- DXF import.
- 54 Sets work offsets.
- 400 Sets tool life management.
- 8,000 Sets macro variable.
- 64 Bit microprocessor.
- 2,048 KB Program memory.

- Main and subprograms can 
   be edited and run as one file.

- Programs can be run from the
    front side USB or the hard drive.

- 3D circular interpolation.
- G-Code guidance.
- Helical interpolation.
- NURBS interpolation. (*)

- Programmable in-position check.

- Scaling.

- Simple programming (NAVI mill 

    conversational programming).

- 4G SSS Control
    
(Super Smooth Surface).
- Tolerance control.
- Spiral/conical interpolation.
- Tool Center Point Control.
- 3D tool radius compensation.
- Workpiece position offset for
    rotary axis.

- Inverse time feed.
- Polar coordinate command.
- Upgradable to 5 axes      
   
simultaneous control. (*)


(*) Optional for U.S. market only.

DYCON

HMI_DYCON.jpg

G-Code automatically generated

blue arrow.png
HMI_DYCON2.jpg

Dynamic Conversational Program is a new software for the operator to generate G-Codevery fast by answering menu questions and getting graphical tool path verification.

MICRO MILL

HMI_MICRO_MILL.jpg
HMI_Micro_Mill2.jpg

MICRO MILL is an interface that allows any operator to easily perform milling and drilling operations without using G-Code.

PART SETUP

HMI_Part_Setup.jpg

Using cutting tool to findcoordinate of workpiece (G54...etc). 8 different patterns for various workpiece shapes: Round, Rectangular, Inner or Outer circle.

TOOL SETUP

HMI_Tool_Setup.jpg

Set up tool length under Handle or Jog Mode. 

Video_Play.png

PART / TOOL PROBE

HMI_Part_Tool_probe.jpg

Software embedded.

MAGAZINE MONITOR

HMI_Magazine_Monitor.jpg

Monitoring tool magazine situation on the operation panel. Setting for:
- Heavy tool
- Oversized tool
- Fixed-pot tool

ATC RECOVERY

HMI_ATC_recovery.jpg

ATC recovery function allows the operator to recover the tool changer.

Video_Play.png

APC RECOVERY

HMI_APC_recovery.jpg

APC Recovery function allows the operator to recover the pallet changer.

Video_Play.png

EASY PARAMETER SETUP

HMI_Easy_Parameter_Setup_E.jpg