DYPEC_banner.jpg

DYPEC

Dynamic Predictive Error Compensation, standardly equipped with every Micro Dynamics series machine, corrects position error caused by thermal changes which improves accuracy and part finishes
(resolution 0.1 µm).

THERMAL COMPENSATION

gray_bg.jpg
Thermal_Compensation_DYPEC.png

Thermal sensor
Displacement sensor (option)

Static error before and after 
DYPEC compensation (48 hours test).

DYPEC_TCbefore.jpg
DYPEC_TCafter.jpg

Dynamic axis error before and after 
DYPEC compensation (36 hours test).

DYPEC_TCbefore.jpg
DYPEC_TCafter.jpg
DYPEC_Thermal_Sensor.png
DYPEC_Displacement_Sensor.png
FAQ

How to compensate under different environmental conditions?

Each temperature detector synchronizes and corrects the thermal displacement of the whole machine according to the value received on site, and the stability is within ±5µm.

gray_bg.jpg

Green indicates “System Normal”

Thermal_Compensation_DYPEC_software_in_HMI.jpg

DYPEC SOFTWARE CHART IN HMI

gray_bg.jpg

■ Tool: Ø6 mm
■ Cutting time: 2h 24 min
■ Cutting size: 150 x150 mm
■ Spindle speed: 15,000 rpm
■ Feedrate: 1,500 mm/min

MIRROR SURFACE TEST CUT

gray_bg.jpg
Thermal_Compensation_DYPEC_mirror_milling.jpg

DYPEC Mirror milling with ball 
end mill. Flatness: within 2 µm

MIRROR MILLING

FAQ

When will compensation start? Do I need to warm up?

Function activated automatically once the machine is power on.    No need to warm up the machine.