ATC_banner.jpg

AUTOMATIC TOOL CHANGER

The MEGA / TERA series is equipped with a high-speed double arm tool changer. The magazine is integrated on the machine with an isolated structure, eliminating vibrations to the column, thus improving accuracy and finishes. The dual speed double arm  allows the operator to adjust the speed of the tool changes for oversized, heavy tools and probes, to ensure accuracy and reliability. The ATC recovery function in HMI is a standard feature that assists the operator in recovering the position of the arm and the tool.

gray_bg.jpg
ATC.jpg

1.9 sec Tool to Tool
3.2 sec Chip to Chip

ATC SPEED

gray_bg.jpg
ATC_Full_cover_magazine.jpg

The tool magazine is protected from the machining environment reducing chips and coolant from entering the magazine area.

FULL COVER MAGAZINE

gray_bg.jpg
ATC_Isolated_structure_edited_edited_edi

The tool magazine is integrated to the 
machine with an isolated structure, 
eliminating vibrations to the column.

ISOLATED STRUCTURE 

gray_bg.jpg
ATC_SUpporting_Shoulders.png

Avoid columns side-bending

SUPPORTING SHOULDERS

ATC MAGAZINE PANEL

ATC_Tool_magazine_door.png
ATC_Rear_operation_panel_edited.png

ATC rear operation panel(*) and door allow access for loading, unloading and inspection of tools while the machine is in operation. Tools can be called up either by tool number or by pocket number. During manual operation the machine will continue the cycle without interruption until ATC door is closed and the key is switched to automatic. 

(*) Except MEGA 30V and TERA 40V.